Powdered Milk Paint Remover

Just Add Water $11.50/bag - Makes 1/2 Gallon (covers approx. 65 sq. ft.) $19.95/bag - Makes 1 Gallon (covers approx. 125 sq. ft.) Select Size 1/2 Gallon Gallon

Customer Testimonials
Your milk paint remover is FANTASTIC!!!! I tried using a heavy-duty stripper to remove layers of paint (latex, oil & milk, I believe) from the punched metal panels of an old pie safe. The toxic, smelly stripper wasn't doing the job and I was afraid I'd have to resort to a wire brush attachment on my drill. I mixed a small amount of your paint remover, applied it with a brush ---and minutes later I washed ever single paint layer away with ease. UNBELIEVABLE!
--Mary M.
Pittsburgh, PA

I live in a late 18th century house and have tried in vain to remove some gray paint from pine paneling in my home. After using your milk paint remover, I felt compelled to write and tell you what a wonderful product you have and what a great job it did removing my problem paint. It was easy to mix in any amount I needed and it gave off no noxious or toxic odor. Thank you for a great product.
--Averill Park, NY

Wash Away Layers of Tough Old Paints
Latex - Casein - Oil - Milk

An effective powder that when mixed with water makes a powerful paint remover, for easier and less expensive removal of thick, old paints. When removing thin layers of modern oil paints or clear finishes, such as varnishes, shellacs, lacquers or synthetics, a solvent remover is recommended. Makes a thick, easily applied cream that dissolves up to eight layers of old paint with one application. There are no toxic fumes, acids, or fire hazards, and difficult scraping is eliminated. Keep this remover away from aluminum, clothing, plastics, linoleum, leather and soft goods. Use it in a temperature of at least 65 degrees - the warmer the temperature the quicker the action.

DIRECTIONS: Mix one part powder to one part of water using any container except aluminum or metal. Heavy plastic or glass preferred. Pour the powder slowly into cool water, while stirring. Let the mix stand for five or ten minutes until it has formed a thick paste and then re-stir into a cream. Flow on the mixture with nylon paint brush. Some layers will be dissolved in minutes but it might take as long as an hour to completely dissolve some crusty old antique paints. A mist spray of water will keep the stripping action going. Spot test with a wet cloth, when you see the original wood surface you can wash everything away by scrubbing with a medium steel wool pad. Some wood may darken, but a quick after-wash with oxalic acid or strong vinegar will quickly restore the natural wood tone. Clean the surface thoroughly with water before applying new finishes.

NOTE: Try the mixed paint remover in an inconspicuous area first.

CAUTION: Irritant - Harmful if swallowed
Contains sodium carbonate and calcium hydroxide. Avoid contact with eyes and prolonged contact with skin. In cases of eye contact, flush freely with water. If swallowed, give water or milk. Call physician.

KEEP OUT OF REACH OF CHILDREN.

View the Material Safety Data Sheet for this product.