Material Safety Data Sheet for Ultra Bond Adhesion Promoter

Distributed by:
The Real Milk Paint Co.
11 West Pumping Station Road
Quakertown, PA 18951
Phone: 215-538-3886
Fax: 215-538-5435

Emergency Number: 800-255-3924 Chem-Tel

Date Prepared 1/2010

Section 1.
IDENTITY: Polymer & Sealer (Binder) 0848 Ultra Bond Adhesion Promoter

Section 2. – Component Information
Ingredients: Acrylic emulsion
Water
CAS, NA or UN number Unknown7732-18-5

Section 3. – Physical Data for Material
PHYSICAL STATE:White liquid
ODOUR THRESHOLD:N/D
VAPOUR PRESSURE:N/D
VAPOUR DENSITY:(Air = 1)
<1 Water
EVAPORATION RATE:(N-Butylacetate = 1)
<1 Water
SPECIFIC GRAVITY:1.0 @ 23oC
BOILING POINT:100 Celsius Degrees Water
MELTING POINT:0 Celsius Degree Water
DENSITY (g/ml):1.0 @23.C
SOLUBILITY IN WATER:(g/ml @ 20c)
Miscible
% VOLATILE (v/v):45-55
PH:8.7-9.5

Section 4. – Fire and Explosion Hazards
Flammability: No

Section 5. – Toxicological Properties of Material
SKIN ABSORPTION:No evidence of harmful effects from available information
EYE CONTACT:May cause irritation
INGESTION:May cause irritation of stomach with abdominal discomfort

Section 6. – First Aid Measures
SKIN:Flush with running water.
EYE:Flush eyes with water. Contact physician if discomfort persists.
INHALATION:Move victim to fresh air. Contact physician if symptoms persist.
INGESTION:Give 2 glasses of water and induce vomiting, if victim is alert. Consult physician immediately.

Section 7. – Precautions for Safe Handling and Use
Steps to Be Taken in Case Material is Released or Spilled:
Mop up spill or broadcast material.
NOTE: Spilled emulsion can be very slippery.

Waste Disposal Method:
Dilute small quantities with water and dispose. Not considered hazardous by RCRA (40 CFR 261).

Precautions to Be Taken in Handling and Storing:
Protect from freezing. Store in cool place.

Other Precautions: None

Disclaimer Note To the best of our knowledge, the information herein is accurate. However, neither the above supplier assumes any liability for the accuracy or completeness of the information contained herein. Final determination for the suitability is the sole responsibility of the user. Although certain hazards are described herein, we cannot guarantee that they are the only ones that exist.