Request a Free Color Chart | View Colors | Customer Testimonials | Site Map & Search | View Cart/Checkout

Material Safety Data Sheet for Ultra Bond Adhesion Promoter

Distributed by: View printer friendly version
The Real Milk Paint Co.
11 West Pumping Station Road
Quakertown, PA 18951
Phone: 215-538-3886
Fax: 215-538-5435

Emergency Number: 800-255-3924 Chem-Tel

Date Prepared 1/2002

Section 1.
IDENTITY: FX – 336 – Ultra Bond Adhesion Promoter

Material Safety Data Sheet: OSHA’s Hazard Communication Standard

Section 2. – Hazardous Ingredients/Identity Information
Hazardous Components   CAS#   OSHA PEL   ACHIH TLV   Hazard limits %  
Vinyl Acetate Monomer 108-05-4   10 ppm  
Latex Emulsion in water 7732-18-5      
New Jersey Trade Secret Registry # 05995500-(A-728)

Section 3. – Physical/Chemical Characteristics
Boiling Point: 100°C
Vapor Pressure (mm Hg.): N/A
Vapor Density (AIR = 1):   Heavier than air
Solubility in Water: Water miscible
Appearance and Odor: White liquid
Specific Gravity (H2O = 1):   1.1
Melting Point: N/A
Evaporation Rate: 1
Butyl Acetate = 1  

Section 4. – Fire and Explosion Hazard Data
Flash Point (Method Used): 212°F
Extinguishing Media: Water, Carbon Dioxide, Dry Chemical
Special Fire Fighting Procedures:  Fire fighters should wear self-contained breathing apparatus.
Unusual Fire and Explosion Hazards:  None known
Flammable Limits: LEL  N/A    UEL  N/A

Section 5. – Reactivity Data
Stability:  Stable
Conditions to Avoid:  Relatively non-reactive
Incompatibility:  None
Hazardous Decomposition or Byproducts:  CO, CO2
Hazardous Polymerization:  Will Not Occur
Conditions to Avoid:  None known

Section 6. – Health Hazard Data
Route(s) of Entry:
  • Inhalation? Yes if sprayed
  • Skin? No
  • Ingestion? No

Health Hazards (Acute and Chronic):

  • None known

Carcinogenicity:

  • NTP? Not listed
  • IARC Monographs? Not listed
  • OSHA Regulated? Not regulated

Signs and Symptoms of Exposure:

  • Formaldehyde is present in very small amounts and may cause cancer in lab animals. Products may irritate skin.

Medical Conditions Generally Aggravated by Exposure:

  • None known

Emergency and First Aid Procedures:

  • Skin: Wash skin with soap and water.
  • Eyes: Flush eyes with copious amounts of water.

Section 7. – Precautions for Safe Handling and Use
Steps to Be Taken in Case Material is Released or Spilled:
Mop up spill or broadcast material.
NOTE: Spilled emulsion can be very slippery.

Waste Disposal Method:
Dilute small quantities with water and dispose. Not considered hazardous by RCRA (40 CFR 261).

Precautions to Be Taken in Handling and Storing:
Protect from freezing. Store in cool place.

Other Precautions: None

Section 8. – Control Measures
Respiratory Protection: None normally needed.

Ventilation: Mechanical (General) Good general ventilation.

Protective Gloves: Rubber Gloves.

Eye Protection: Safety Glasses.

Other Protective Clothing or Equipment: To prevent skin contact.

Work/Hygienic Practices: Follow practices of good industrial hygiene.